Peek plastic hard wearing parts skin#
Peek plastic hard wearing parts plus#

Many plastic materials such as PA, PET, E-CTFE, PVDF can’t sustain such a high temperature. Pharmaceutical products including centrifuges and disc filters: Medical equipment is cleaned at temperatures reaching up to cleaned 150☌. PEEK is the material often used in this application because of its high temperature resistance. Currently PET fabrics are used but when temperatures as high as 190☌ are required along with the same characteristics and shrinkage level as PET, Polyetheretherketone is a very good option.įeed drying: At the end of production, some animal foods are dried on a belt which reaches a temperature of 150☌. For this reason, PEEK, which has a high temperature resistance and low moisture absorption, is an apt choice.įood drying: Processes requiring dehydration for the production of powders, pastes and granules demand temperatures as high as 150☌.

Peek plastic hard wearing parts skin#

It does not harm body or skin so it is very useful to repair soft tissues and grafts.ĭialysis pump filter: In dialysis, malfunction of the pumping mechanism causes severe problems and hence a good pump is required which is not effected by heat or cold. Implant Material: PEEK is quite flexible, durable and strong in nature. Different kinds of chemical manufacturers like to use PEEK to make the filter itself more than polyester, which is less durable. The drying process is accomplished by running the chemicals through a filter on a belt. Vacuum belt filters: Vacuum belt filtration is a process where chemicals are de-watered and dried.

Again, due to good resistance to acid and chemicals along with controlled porosity, PEEK is considered a high quality material to produce modern products. PEEK, with a thickness of 50 microns, is thinner than the conventionally used polypropylene at 195 microns. Membrane spacer-battery: This is a mixed material which is used to separate different layers in a battery. PEEK is not effected by biodiesel and hence provides good sustainability for a long time. However, biodiesel degraded the standard filters as these were prepared from PA. The material is also favored because it is light weight, chemically inert, and relatively inexpensive.īiodiesel fuel filters: Biodiesel has been recognized worldwide as an alternative channel of energy because of its immense benefits. PEEK is ideal for exterior aerospace conditions where the material comes into contact with atmospheric particles and low temperatures. TECAPEEK PVX is an ultra high performance bearing material with wear enhancing additives.Ĥ) FDA Compliant PEEK– grades available that meet FDA requirements.

Peek plastic hard wearing parts plus#

PET, PPS, HDPE, PAI, PEEK, or assigned materialġ2sets injection machines +8 sets CNC machinesġ) Virgin PEEK (unfilled)– is naturally abrasion resistant.Ģ) Glass-Filled PEEK offers enhanced mechanical and thermal properties over those of basic PEEK, plus excellent resistance in harsh chemical environments and is electrically insulative.ģ) Bearing Grade PEEK– has enhanced bearing and wear properties.

=>High temperature resistance: When the process temperatures go beyond the limit of what conventional plastic materials can withstand, it is advisable to go for PEEK. =>Hydrolysis resistance: PEEK material can be exposed for a long period of time to high pressure water and steam without exhibiting any serious degradation. It displays good friction as well as wear properties. =>Long life: It is a hard, stiff and strong polymer.

It can only be dissolved in concentrated nitric acid or sulphuric acid. => Chemical resistance: PEEK displays high resistance amidst a wide range of chemical environments, even including high temperatures. This engineering plastic has a proven track record in challenging environments such as aerospace, oil and gas, and semiconductor. PEEK has the ability to maintain stiffness at high temperatures and is suitable for continuous use at temperatures up to 338oF (170oC). It offers hydrolysis resistance to steam, water, and sea water. PEEK (polyetheretherketone) is a highperformance engineering plastic with outstanding resistance to harsh chemicals, and excellent mechanical strength and dimensional stability.